Compared with laser cutting board, laser pipe cutting has more complicated process, and more details need to be paid attention to in order to cut the pipe well, especially when cutting relatively small metal pipe, the small pipe is basically thinner, so the pipe is also softer. The 6-meter-long pipe is clamped on the laser pipe cutting machine, and the middle will sag due to gravity, so it needs to be supported by the supporting table. When the laser pipe cutting machine cuts small tubes, the front chuck should try to use the claw structure of the double pressure wheel. The double pressure wheel has a total of eight claws, which is twice as many as the conventional four-jaw structure. Such a structure, so that the position of the laser cutting tube is stable and not easy to shake. The vertical and horizontal cutting parts are on the same horizontal line, which ensures the cutting accuracy of small tubes.

When we contact new customers, customers often ask us what are the environmental requirements for the use of this laser pipe cutting machine? Will the requirements for the use of this high-tech equipment be very harsh? These questions are often asked by new customers. In response to these two questions, the following Jettech laser pipe cutting machine manufacturer will analyze the use conditions of the laser pipe cutting machine in detail for you. 1. Power supply specifications: three-phase five-wire system, 380V 50Hz, three-phase unbalance <2.5%, line voltage 2. Protective grounding: machine tool grounding resistance <4Ω. 3. The ventilation strip is good, no dust, no corrosion, no pollution, no conductive dust. 4. There is no large vibration around the machine tool, and anti-vibration trenches are dug around the bed. 5. The laser is required to be installed at an ambient temperature of 20°C (to prevent condensation), and an inspection channel of more than 1 meter should be reserved around it. 6. The refrigerator is a special equipment for providing cooling circulating water to the laser and the cutting head collimation device. The cooling circulating water requires high-quality deionized water (pure water), the conductivity is less than 10 micro Siemens, and the optimal flow rate is 1 liter. /minute. 7. The back of the machine tool is the electrical control cabinet, and the front is the operating table. The distance between the electrical control cabinet and the workshop wall should be greater than 1.5M; 8. The numerical control

Fiber laser cutting machine in the process, the characteristics of the emitted laser, can make the energy in space and time highly concentrated. The refractive medium of the eye is focused on the retina to form an image, and the energy density on the retina is increased by 104 to 105 compared to the incident energy density on the cornea. laser monochromacy is good, and the chromatic aberration in the fundus of the eye is small. If you would like to reduce the radiation of fiber laser cutting machine, then you have to use the laser protection mirror, which is specifically for the fiber laser cutting machine equipment, which can effectively reduce the radiation of fiber laser cutting machine, so the staff in the use of this do not have to worry about it, you can rest assured that the cutting workpiece. The laser protection mirror has many types, including composite, absorption, reflection and diffraction.

On April 8, Li Qiang, executive chairman of Foshan Metal Materials Industry Association, visited Guangdong Chittak Intelligent Equipment Co., Ltd with his assistant Li Qingying. Our boss Huang jianbin gave them warm hospitality. Chairman Li Qiang successively visited laser pipe cutting machines, pipe bending machines, chamfering machines, saw blades and other equipment related to the stainless steel water pipe industry, and praised the modern R & D management advantages of boss Huang Jianbin's team. 2019 is the outbreak year of the stainless steel water pipe industry. Chittak laser pipe cutting machine, pipe bending machine an

In Jiangmen Smart Expo, Guangdong Chittak Intelligent Equipment Co., Ltd. brought the star models CTK-X5 laser pipe cutting machine, CTK-A3 laser pipe cutting machine, and CNC 3-axis pipe bending machine to the Jiangmen Zhuxi Convention and Exhibition Center from September 5 to 7, 2019. Welcome customers from around Jiangmen to visit and negotiate at the exhibition site. Chittak has gained a lot, so many exhibitors have a strong interest in our equipments, and there are many customers who have many on-site transactions. At this Jiangmen Smart Expo, Chittak has strong organization and leadership, well-organized arrangements, and solid preparations. It has caused a lot of waves at the exhibition and produced extensive echoes. It has achieved increased popularity, expanded brand publicity, and promoted laser technology. The purpose of selling pipe cutting machines and pipe bending machines, promoting business growth, and building the confidence of corporate employees has achieved remarkable results.

In April 2019, Guangdong Chittak Intelligent Equipment Co., Ltd. was invited to join Foshan High-tech Industry Association and passed the assessment of relevant departments and officially became a member of the association. Foshan High-Tech Industry Association was established under the guidance of the Science and Technology Bureau of Foshan City. It is a non-profit social organization spontaneously established by high-tech enterprises in the city and private science and technology enterprises in the province. The association aims to integrate the resources of the government, society and enterprises and build a platform for communication and interaction between government and enterprises. To promote cooperation between industry, university and research, and promote the transformation of technological achievements in universities; To safeguard the legitimate rights and interests of high-tech enterprises and serve the overall interests of the high-tech industry. As a high-tech enterprise, Chittak adheres to the principle of "relying on scientific and technological progress and technological innovation to promote the sustainable and rapid development of the enterprise", gives full play to the role of R&D personnel, strengthens the construction of technical management system, and constantly improves the capability and strength of R&D innovation. In the future, Chittak will continue to develop advanced technology, provide higher quality products and cost-effective metal pipe processing solutions, and with the he

In April 2019, Guangdong Chittak Intelligent Equipment Co., Ltd. was invited to join Foshan High-tech Industry Association and passed the assessment of relevant departments and officially became a member of the association. Foshan High-Tech Industry Association was established under the guidance of the Science and Technology Bureau of Foshan City. It is a non-profit social organization spontaneously established by high-tech enterprises in the city and private science and technology enterprises in the province. The association aims to integrate the resources of the government, society and enterprises and build a platform for communication and interaction between government and enterprises. To promote cooperation between industry, university and research, and promote the transformation of technological achievements in universities; To safeguard the legitimate rights and interests of high-tech enterprises and serve the overall interests of the high-tech industry. As a high-tech enterprise, Chittak adheres to the principle of "relying on scientific and technological progress and technological innovation to promote the sustainable and rapid development of the enterprise", gives full play to the role of R&D personnel, strengthens the construction of technical management system, and constantly improves the capability and strength of R&D innovation. In the future, Chittak will continue to develop advanced technology, provide higher quality products and cost-effective metal pipe processing solutions, and with the he

April 21, 2019, the 13th South China Stainless Steel • Metal Materials Exhibition officially kicked off, April 23 successfully concluded. As one of the important participating brands in this exhibition, Chittak is well prepared for this exhibition. The company brought its multi-function automatic laser pipe cutting machine, automatic Angle pipe cutting machine and the newly developed three-axis pipe bending machine to the exhibition site, attracting a large number of exhibitors to come to the exhibition. During the exhibition, , explaining the product performance and advantages in detail. According to the production needs of customers, they provided product solutions, and received favourable reviews from customers. Many exhibitors have directly expressed the intention of further cooperation.